Category Archives: Uncategorized

Star Wars Fans Create BB8 Models Using 3D Printers

This article is shared from 3Ders.org. You can read the full article here.

BB8 Builder’s Club, is growing organization of 1800+ that is focused on building home-brewed BB8’s. As of “October the BB-8th”, they are now officially recognized by LucasFilm Ltd. Moreover, they have publicly released the STL files for 3D printing the parts. You can learn more, and even join, the BB8 Builder’s Club here.

bb-8-builders-club-ultimaker

Also, completely independent of the BB8 Builder’s Club, “part-time makergeek” Jean-René Bédard has developed his own BB8, as well. His droid is 3D-printed, remote-controlled,  managed by Arduino circuits and stands on its own two wheels. You can read the full story here, at 3ders.org.

This article features Ultimaker 3D printers, which are available for purchase from Shop3DUniverse.com.

Introducing The Raptor Hand by e-NABLE

I had the rare privilege recently to work with a team of amazing individuals to help design e-NABLE‘s latest model of 3D printable prosthetic hand, The Raptor.

Raptor-Hand

Ivan Owen, Peter Binkley, Frankie Flood, and Andreas Bastian did the 3D modeling work, while I provided project management and coordination, as well as 3D printing and testing of design iterations.

These guys are my heroes! I’ve been doing project management for over 20 years, but I’ve never witnessed a team work so effectively and efficiently as what I witnessed with this team. These guys started with a blank slate, designed original 3D models for all the parts of the Raptor Hand, including many iterations and improvements – and all within a period of less than one month, on top of working their full-time jobs!

The Raptor Hand was introduced in a big way at the recent Prosthetists Meet Printers conference with Johns Hopkins. Please check out Jen Owen’s terrific blog post describing that event – I can’t possibly describe it any better than she did.

The design this team came up with is truly elegant. A lot of thought was given to what worked best with previous designs, and where there were issues that could be improved upon.

The Raptor Hand is intended to bring together the best and most widely tested ideas from a year of crowd sourced innovation.
The objectives in designing the Raptor Hand were as follows:

  • To simplify fabrication and assembly and repair for makers and recipients alike
  • To provide a platform and reference design for future innovations, incremental and radical
  • To identify a core features set and standardized dimensions embodied in accessible 3D models with progressive licensing terms that will ensure widespread availability and future development.

e-NABLE’s prior “go to” designs included the Cyborg Beast, the Talon hand, the Ody hand and the Talon Beast. To these classics, the Raptor Hand by e-NABLE adds the following features:

  • Easier and quicker printing (no supports required)
  • Easier and quicker assembly (no Chicago Screws required, simplified cord installation)
  • An improved tensioning system (modular design, allowing for easier future development)
  • Improved documentation (in progress)

All of the parts needed for assembly can be found easily in most areas, but if you prefer to get everything in one place, 3D Universe offers kits with all of the assembly materials needed for producing a Raptor Hand.

Instructions

The Raptor Hand instruction manual is in the process of being developed. Until then, please refer to the following video tutorial for assembly instructions.

[youtube https://www.youtube.com/watch?v=5HVwC3RnWXk]

Printing instructions:

  • Print without supports (palm and gauntlet have some supports built into the model)
  • Scale all parts as needed (the Raptor Hand is designed to work at scales from 100% through 170%)
    • At 100%, the inside of the palm area measures 55mm
    • Measure across the widest part of the palm, then add 5mm for padding, then divide by 55 to get the scaling factor (for example, if the palm is 65mm wide, then 65 + 5 = 70, and 70 / 55 = 1.27 – so your scaling multiplier would be 1.27 or 127%)
  • PLA is recommended for this design
  • Suggested settings are 0.2mm layer height, 35% infill, 2 outlines
  • Refer to file names for part descriptions. The number in square brackets at the end of each file name indicates how many copies of that STL file need to be printed for a complete hand assembly.

Parts reference:

Raptor Hand Parts - Exploded View

If you have a 3D printer with a large enough build plate, you can print all of the parts for an entire Raptor Hand in one pass. Here’s a time-lapse showing the Raptor being printed in various colors.

STL files for printing a Raptor Hand can be downloaded from

Thingiverse: http://www.thingiverse.com/thing:476403

YouMagine: https://www.youmagine.com/designs/the-raptor-hand-by-e-nable

Also, be sure to check out e-NABLE’s new Handomatic web application, which can create custom scaled STL files for you in just a few clicks so you don’t have to do the scaling yourself.