The Ultimate Guide to Getting Started with the FlashForge Creator X

Here at 3D Universe, we’ve been using the FlashForge Creator and Creator X almost around the clock for months on end. We have been very impressed with what this printer can do, given the very reasonable price.

However, in getting started, we found the need to reference a variety of different information sources on the Internet and had to go through a good deal of trial and error to get everything working the way we wanted.

Now, after months of using the Creator and Creator X, we wanted to give something back to the 3D printing community, so we have prepared a new guide containing all of the information you’ll need to get started in one place.

This is our gift to you – free of charge. No need to fill out any forms or give us your email address.

Creator-X-Guide

Free download: The Unofficial FlashForge Creator X Manual

The official FlashForge manual isn’t bad, but it only covers the initial hardware setup and Replicator G software. Many users prefer to use other software options, of which there are many available. Our unofficial guide covers some of these other options, as well as the process for upgrading to the popular Sailfish firmware. We also show how to install and use a glass build plate and explain why you may (or may not) want to consider doing so.

In addition to the PDF version of the guide, we are also releasing a series of video tutorials that correspond to the topics in the PDF.

Been thinking about getting a 3D printer, but feeling hesitant because you’re not sure exactly what you’re getting into? Watch these videos, and you’ll know exactly what to expect!

For the entire playlist of videos, click here.

Part 1: Unboxing and Initial Hardware Setup
Part 2: Overview of Software Options
Part 3: Installing and Configuring Replicator G
Part 4: Installing and Configuring Slic3r
Part 5: Installing and Configuring MakerWare  (coming soon!)
Part 6: Installing and Configuring Simplify3D™ (coming soon!)
Part 7: Upgrading to Sailfish Firmware
Part 8: Installing a Glass Build Plate (coming soon!)

A note about FlashForge support:

Please refer to the official FlashForge manual included with your Creator X (on the SD card) before contacting FlashForge support. The FlashForge support team will not provide support for anything not covered in their official manual. FlashForge only provides support for their hardware and the Replicator G software.

For any questions related to other topics covered in this unofficial manual, 3D Universe customers are welcome to contact 3D Universe at support@3duniverse.org or 800-689-4344.

To purchase a FlashForge Creator X, please visit shop3duniverse.com.

9 thoughts on “The Ultimate Guide to Getting Started with the FlashForge Creator X”

  1. Nice, I just received my Creator X, I’d suggest one more thing: it doesn’t work with MakerWare with Replicator2X settings (like claimed in the official description), the x and y directions are shortened, but it perfectly works if you choose Replicator Dual in the MakerWare popup menu.

    1. Yes, the Creator X is essentially a MakerBot Replicator 1 Dual (with enhancements). The build dimensions and X/Y offsets are different for the 2X, so you’ll always want to choose Replicator 1 Dual as the printer type.

  2. Thanks for the guide as well the Sclic3r article.
    I have had a pretty good run with the FF creator. I am thinking of trying a single head delta type next. Have you had any experience with a delta?

Comments are closed.