Using Simplify3D to Print an Entire Cyborg Beast Prosthetic Hand on a Single 6 x 9″ Build Plate �

I recently taught my wife how to setup 3D prints using Simplify3D. She’s a natural and was setting up her very first print job within 10 minutes, with me helping only with verbal pointers from time to time.

2014-06-09 10.48.15 pm

These days, most of what I print is prosthetic limbs, so I was teaching Alina how to setup a print job for a Cyborg Beast e-NABLE Hand. It’s a pretty advanced print job to start off with. For best results, the support material needs to be customized so it only goes in specific places, which Simplify3D allows you to do, as shown here.

As if this print job wasn’t challenging enough already, Alina proposed something really interesting. I normally print a Cyborg Beast in two print jobs – one for all the hand parts, and another for the “gauntlet” – the part that fits over the arm. As Alina was setting up her very first print job, she asked if we could just position the smaller parts underneath the bigger parts. We did a test, and it came out surprisingly well! Check out the video (10 minutes) here.

To make a 3D printed hand for someone who needs one, please visit:
http://www.facebook.com/enableorganization
http://enablingthefuture.org

To buy Simplify3D, please visit:
http://shop3duniverse.com/products/simplify3d-software

To buy a FlashForge Creator X, please visit:
http://shop3duniverse.com/collections/3d-printers/products/flashforge-creator-x

To buy a kit with the assembly materials you need to make your own Cyborg Beast 3D printed hand, please visit:
http://shop3duniverse.com/collections/3d-printable-kits/products/e-nable-hand-assembly-materials-kit-cyborg-beast-edition